About Remanufactured Marine Engines
At Michigan Motorz, we carefully select only the most premium, low-hour engines to professionally remanufacture. These engines all undergo a 15-point inspection to insure quality, reliability and durability.
To give you an idea of all that goes into a Michigan Motorz remanufactured engine… the engine block and cylinder heads are completely disassembled, baked and blasted, checked again for cracks (magnafluxed), then reassembled using only the finest components. The engine block is always decked to insure proper sealing with the cylinder heads. The crank is either turned, polished or replaced, new Federal Mogul teflon-coated hypereutectic pistons (standard to .030 over) are installed, new or remanufactured rods, new Melling oil pump and timing set, new Hastings rings, new brass freeze plugs, new marine roller cam shaft and roller lifters (in applicable applications), new Durabond main bearings, cam bearings and rod bearings are used in all engines.
Cylinder heads are 3-angle cut for proper seating, and all of our heads are resurfaced and not milled. Before shipping out each Michigan Motorz remanufactured engine, we pressure check, spin test and compression test the engine to ensure 100% quality and reliability.
Most Michigan Motorz remanufactured engines come with the valve covers, marine oil pan, circulation pump and timing cover installed, unless otherwise specified.
For more information, call us at: (248) 524-9600
Remanufactured Marine Engines
100% Secure
Shopping with Michigan Motorz is 100% secure!
Our website is fully encrypted with SSL certificates.
