This BRAND NEW 2008 7.4L (454 ci) Vortec SILVER package is great for those that need a little more than just a base engine or long block but yet still don't quite need a complete engine package. This package will fit, bolt in, and work in nearly all 7.4L (454 ci) marine applications from 1976-2001 with no modifications. If you have an existing Mark 4, Gen 5 or Gen 6 7.4L engine from Mercruiser, Volvo Penta, OMC, or inboard application, then this 7.4L Vortec engine package will work in your application. This 7.4L SILVER package is rated at 330 hp @ 4600 RPM at the crank and comes with the following components:

• 2008 7.4L (454 ci) Vortec marine engine - Standard rotation, cast iron block, teflon coated pistons, high flow oval port Vortec cylinder heads with sintered powered-metal exhaust valve seat inserts, high performance GM marine roller cam shaft with roller valve lifters. These are just a few of the features that add up to more horsepower, greater low end torque, excellent durability, and longevity. All marine engine manufacturers (Mercruiser, Volvo Penta, Marine Power, Indmar, PCM, etc) used this Gen 6 7.4L Vortec engine from 1996-2000.
• Cast iron intake manifold - Made for marine applications. Low rise, 4 barrel intake commonly used in standard horsepower marine engine applications by Mercruiser, Crusader, OMC, etc. This manifold is made for fresh water and the harshest salt water environments.
• Holly 4175 marine carburetor - four barrel with electric choke, spread bore, 650 cfm, 30cc accelerator pump, single fuel inlet, vacuum secondaries, "J" tubes, etc (U.S. Coast Guard approved), one-piece flexable fuel line, flame arrestor with breather tube and pcv hookup.
• Electric fuel pump kit with water/fuel seperator - a low pressure 4-7 psi electric fuel pump (U.S. Coast Guard approved), delivers the right amount of fuel to the carburetor but it first must pass through the water/fuel seperator to protect vital engine components from raw water. Includes brackets and oil pressure switch. Loss of oil pressure will automatically shut off the fuel pump thereby preventing gas vapors from accidental ignition and preventing possible damage to the engine.
• Delco Voyager ignition kit - Voyager distributor with Electronic Spark Timing (EST), High energy ignition coil, 8mm marine spark plug wires and spark plugs, shift interrupt wire, timing tool, and other misc wires to easily connect to any existing marine engine wire harness. (U.S. Coast Guard Approved).
• Also included - bi-directional circulation pump, 14" I/O fly wheel, harmonic balancer, 8 quart marine oil pan (approx 9 quarts of oil required with oil filter), side mounted dip stick and tube, EZ oil drain kit, lifting eyes, one year manufacturers warranty, and complete installation guide and operation manual.

Available Options:

Remote oil filter kit:	(+$179.00)
Inboard fly wheel:	(+$199.00)
Fresh water cooling half kit:	(+$579.00)
Fresh water cooling full kit:	(+$799.00)
Reverse rotation:	(+$899.00)

$6,199.00 plus shipping!

Item number: 7400-ISilver